Encore 1T2R Uživatelská příručka

Procházejte online nebo si stáhněte Uživatelská příručka pro Síťové karty Encore 1T2R. ENCORE 1T2R [en] Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 22
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
ENLWI-NX2
IEEE 802.11n 2.0 Draft Wireless
LAN PCI Adapter
User’s Guide
Zobrazit stránku 0
1 2 3 4 5 6 ... 21 22

Shrnutí obsahu

Strany 1 - ENLWI-NX2

ENLWI-NX2 IEEE 802.11n 2.0 Draft Wireless LAN PCI Adapter User’s Guide

Strany 2

3) Click Finish to finish the installation and to restart the computer. 4) Plug the Wireless N PCI Adapter into an available PCI slot on your compu

Strany 3

ENLWI-NX2 WIRELESS UTILITY SETTING The user can configure the wireless settings using the Wireless Adapter Configuration Utility. Double-click the ut

Strany 4 - TABLE OF CONTENT

Link Quality: Shows the link quality of the Wireless N PCI Adapter with the Access Point when operating under Infrastructure mode. Signal Strength: Sh

Strany 5 - INTRODUCTION

Authentication: The following options are available: Open System, Shared Key, WPA-PSK, WPA2-PSK, WPA EAP-TLS, WPA2 EPA-TLS . Select Open System, Sha

Strany 6 - UNPACKING AND SETUP

WPA EAP-TLS If using the WPA/WPA2 EAP-TLS authentication method, please select the Encryption type for TKIP or AES then select the WPA/WPA2 Certific

Strany 7 - Check the installation

Site Survey This screen allows the user to scan for available wireless networks (wireless clients and Access Points). It also allows the user to esta

Strany 8 - SOFTWARE INSTALLATION

Profile Profile – The user can create and manage the created profiles for home, work or public areas. By double-clicking on one of the created profile

Strany 9

WPS WiFi Protected Setup (WPS) is an optional certification program from the Wi-Fi Alliance that is designed to ease the task of setting up and confi

Strany 10

4) If the WPS configuration was successful, the follow window will show on. 5) If the WPS configuration was failed, the follow window will show on.

Strany 11 - Link Information

Enter a PIN into my access point Using the WPS configuration with the “Enter a PIN into my access point” method, the configuration steps as below: 1)

Strany 12 - Configuration

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital devi

Strany 13

4) If the WPS configuration was successful, the follow window will show on. 5) If the WPS configuration was failed, the follow window will show on

Strany 14

About This screen displays information about the Wireless N PCI Adapter, such as the Driver and Utility version. When a new version of the utility b

Strany 15 - Site Survey

TECHNICAL SPECIFICATIONS Hardware Interface 32-bit PCI bus Standards IEEE 802.11n draft v2.0, IEEE 802.11b and IEEE 802.11g Antenna Two 2 dBi dipole a

Strany 16 - Profile

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17

Strany 17

[Hungarian] követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski [Polish] Niniejszym Encore Electronics Inc oświadcza, że ENLWI-NX2 j

Strany 18

INTRODUCTION Congratulations on your purchase of the ENLWI-NX2 802.11n Wireless LAN PCI Adapter. This manual contains detailed instructions regarding

Strany 19

UNPACKING AND SETUP This section provides unpacking and setup information for the ENLWI-NX2 Wireless 802.11n PCI Adapter. Unpacking The box should con

Strany 20

IDENTIFYING EXTERNAL COMPONENTS LED Link The Link LED indicator lighted green when the ENLWI-NX2 802.11n Wireless LAN PCI Adapter is connected to wir

Strany 21

SOFTWARE INSTALLATION This section describes how to install the driver and utility for the ENLWI-NX2 802.11n Wireless LAN PCI Adapter. This can be don

Komentáře k této Příručce

Žádné komentáře