Encore ENVCWI-PTG1 Uživatelská příručka

ENVCWI-PTG1 Wireless Network (IP) Camera with PAN & TILT Software User Guide Version 1.1

- 9 -  CAMERA Panel - TRIGGER OUT: Click to turn on the trigger out connector of the camera. This button is available only when the connected cam

- 10 -  SYSTEM Panel This panel displays the current date and time.  PAN-TILT CONTROL Panel (optional) When you connect a pan/tilt camera, the

- 11 -  Video View Window and Camera List - Video View Window: This window displays the video view of the selected camera, which can be divided i

- 12 - To add a camera 1. Click SETTING in the CONTROLS panel to display the Setting screen. 2. Click Add Camera. 3.

- 13 - In the pop-up Add New Camera dialog window, you can:  Select the Search tab if you are not sure of the camera’s IP address. Click Search came

- 14 - 4. Enter the User name and Password for the camera, and then click OK. The connected camera will be displayed in the Camera List. 5. Click S

- 15 - To remove a camera 1. Click SETTING in the CONTROLS panel to display the Setting screen. 2. Select a camera from the list and click Delete C

- 16 - To record video UltraView provides three methods to record video clips: one is to click the RECORD/ALL RECORD button to record manually; the s

- 17 -  Schedule recording This recording method will work after you have completed the required settings in Schedule Recording Configuration. The

- 18 - - Days: First, select the camera from the pull-down list and select Days tab. Then, select the weekday from the day buttons and then set the

- 1 - Contents Introduction...2 Installation...

- 19 -  Reserved HDD space for each camera: This option allows you to set to reserve the storage space on the hard disk drive for the manual/schedu

- 20 - To playback the recorded video The recorded video clips are saved in your computer, and can be played using the media player on the computer,

- 21 - To set up motion detection options When the motion detection function of the selected camera is enabled, you can set the Motion Options by sel

- 22 - - Mail Server: Enter the mail server address. For example, mymail.com. - Mail From: Enter the email address of the user who will send the em

- 23 - Information Click SETTING > About to display the information of the software application.

- 2 - INTRODUCTION This Software User Guide provides detailed instructions on operating UltraView, a customized software application with a user-frie

- 3 - INSTALLATION Firstly, insert the Installation CD-ROM into the CD drive of your computer to initiate the Auto-Run program. The Auto-Run screen p

- 4 - 2. On the welcome screen, click Next. 3. Click Browse to select the destination location to install the software; otherwise, leave the defau

- 5 - 4. Click Next again to confirm installation. The setup wizard starts to install the software and the progress bar indicates the installation i

- 6 - USING ULTRAVIEW To launch the program This section describes the user interface and operating instructions of UltraView. To launch the program,

- 7 - Item features The following describes the function of each item on the main screen:  CONTROLS Panel - SETTING: Click to enter the Setting

- 8 -  VIEW SELECTION Panel - View mode buttons: UltraView provides multiple view modes, including 1/4/9/16 windows and Full screen mode. - SCAN